Helical Springs
PRODUCT INFORMATION
Helical Compression Springs
Helical Compression Springs
Compression Springs operate with a compression load and get shorter when the load is applied to it. GBS manufactures Compression Springs with a production capacity of 5000 mt p.a. for the various purposes for Railway Rolling Stock, Automobiles, Defence, Agriculture, Heavy Earth Moving Equipment etc. & meet specialized/critical requirements to customer satisfaction. A Compression Spring with a tapered end is the cheapest solution. Therefore at GBS every best possible care is taken to ensure accurate construction of springs.
Compression Springs Hot Wound Range:
Technical Data :
Wire Dia :
13-75 MM MAX.
(SPRINGS OUT OF TRAPIZOIDICAL/SQUARE BARS AS PER BUYERSNEED/DESIGN ARE ALSO AVAILABLE IN PRODUCTION RANGE)
Height
1100 MM MAX.
Bar Length
11,000 MM MAX
I.D.
450 MM MAX
Steel
Spring Steel As Per BIS/GIS/DIN/SAE, Etc.
- Manfacturing
- Sizing
- Bar Peeling
- Centreless Grinding
- Magnaflux Testing
- Taper Rolling
- Coiling & Heat Treatment
- End Grinding
- Scrag & Load Test
- Shot Peening
- Corrosion Protection
Approval Certificate
RDSO Approval for Vande Bharat/Train-18 springs
Hot Coiled Cylindrical Springs for use in Suspension of I.R. coaches having FIAT Design Bogie
CLW Approval Letter For Helical Spring For 3-PH LOCOMOTIVE ES
RDSO Approval for Suspension Coil Springs
as per Spec. No. WD-01-HLS-1994 Rev. 3 of Jan 09; Material- IS:3195 & Spec. No. MP.0.4900.12 Rev.02 of Nov’12
RDSO Approval For Spring Single Coil for G4/D4/G4D Locomotives